Wind Deflector; Retention System 54 H; Chin Strap With Double-D-Fastening - Schubert S2 SPORT Manual

C. THE HELMET

8. WIND DEFLECTOR

The wind deflector prevents the unpleasant effect of the wind created as
you ride flowing into the helmet. In addition, the riding noise in the helmet is
reduced.
The wind deflector is attached by Velcro strips
on the inside of the acoustic collar and can be
removed when required to provide an additional
flow of fresh air, especially in hot weather.
Advice:
The fit of the bottom of the helmet is extremely important in ensuring
that the helmet is as quiet as possible. If you have a smaller collar size,
we recommend that you also wear a scarf.
9. RETENTION SYSTEM
The retention system of the S2 SPORT consists of a chinstrap with
additional neckbands.

CHIN STRAP WITH DOUBLE-D-FASTENING

The double-D-fastener allows for an easy and precise adjustment of the
chin strap.
54
Closing the chin strap
1. Thread the end of the chin strap
through the double-D-fastener.
2. Pull the chin strap tight and feed the
free end back through the front ring.
3. Pull the free end of the chin strap until
it's tight and comfortable on your chin.
4. Take the free end of the chin strap
reverse and affix to the press stud.
Loosing and opening
Release the press stud and pull on the red lug
of the double-D-fastener, so that the chin strap
is loosened.
Thread the free end of the chin strap out of the
double-D-fastener.
Caution:
Never ride without a closed and adjusted chin strap, otherwise you risk
losing the helmet from your head.
EN
55