C. THE HELMET
14. ADDITIONAL SAFETY FEATURES
ANTI-ROLL-OFF-SYSTEM (A.R.O.S.)
The anti-roll-off system specially developed by SCHUBERTH and provided as
a safety feature in every SCHUBERTH motorcycle helmet ensures that, if the
chinstrap is fastened and correctly adjusted
a) the helmet cannot pivot off the head
from behind,
b) the risk of contact between the chin
section of the helmet and the chin or
neck of the rider is minimised due to
the low angle of tilt and
c) the consequences of the helmet
hitting the rib cage as the result of
an accident are reduced.
REFLECTIVE PANELS
Together with the silver reflective strips located laterally at the back of the
neck pad, the two reflective panels integrated into the left and right areas
under the visor plate help make the motorcycle rider more noticeable on
the road, especially in conditions of poor visibility. If the helmet is plain
(no decoration), the SCHUBERTH name also appears on the front and
back of the helmet in a reflective film.
Note:
Keep the reflective safety areas clean.
Note:
When riding in France, local law requires that further reflective safety
stickers be attached to the front, back and both sides of the helmet.
74
D. PUTTING THE HELMET ON
AND TAKING IT OFF
Note:
Please note the information on the handling of the chin strap.
1. PUTTING THE HELMET ON AND TAKING IT OFF
1. Open the chinstrap.
2. Take hold of the lower ends of the chinstrap and pull these apart.
3. It will now be easy to put the helmet on.
4. Fasten the chinstrap.
5. Make sure the chinstrap passes under the chin and fits firmly.
2. TAKING OFF THE HELMET
1. Open the chinstrap.
2. Grasp the ends of the chinstrap and pull the chinstrap ends
apart.
3. The helmet can now be removed easily from the head.
Advice:
To avoid scratching any objects on which you place the helmet when
you take it off, we recommend closing the chinstrap after you have
taken the helmet off.
EN
75