Equalizer Section - Steinberg RETROLOGUE2 Manual Del Usuario

Retrologue
FX Page
Predelay
Room Size
High Cut
Chorusing On/Off
Chorusing Rate
Chorusing Depth

Equalizer Section

The Equalizer section contains a 4-band parametric equalizer.
With the 4 frequency bands, you can shape the tone color, to create a brighter or
darker sound, for example. The two mid-range bands act as peak filters and the low
and high bands act as shelving filters. All bands are fully parametric with adjustable
gain, frequency, and Q factor. Each frequency band offers the following controls:
On/Off
Gain
Freq
Determines how much time passes before the reverb is applied. This allows
you to simulate larger rooms by increasing the time it takes for the first
reflections to reach the listener.
Controls the dimensions of the simulated room. At a setting of 100 %, the
dimensions correspond to a cathedral or a large concert hall. At a setting of
50 %, the dimensions correspond to a medium-sized room or studio. Settings
below 50 % simulate the dimensions of small rooms or a booth.
Attenuates the high frequencies of the reverb tail. The lower this value, the
less high frequencies are contained in the reverb tail.
Activates/Deactivates the chorusing effect.
Specifies the frequency of the pitch modulation.
Sets the intensity of the pitch modulation.
Activates/Deactivates the frequency band.
Sets the amount of cut or boost for the corresponding band.
Sets the frequency that is cut or boosted with the Gain parameter.
45