Step 4: Build The Fixture - High End Systems Wholehog III Manual De Usuario

Capítulo 31: El Creador de Aparatos (Fixture Builder)
Lamp Control commands from Strobe channel:
1. Select the function cell for a blank DMX Entry of channel 10 and press
Set
2. Select Control on the left column to display a list of Control function
sub-categories.
3. Select Lamp Control as the desired function. The window will close
and you will see Lamp Control assigned as the function for channel
10. Note the feature column will auto-fill with 'Strike'. Select this cell
and press
4. Select the DMX value cell for this DMX Entry and press
DMX for the lamp douse according to the DMX protocol (245) and
press
5. Repeat the above steps for the lamp strike ability of the fixture.
Note that Real World values are not allowed for Lamp Control functions.
31.2.4

Step 4: Build the Fixture

Your fixture should be similar to the example below:
To build the fixture:
1. Press the Build Type button to build the fixture library.
Flying Pig Systems
. A dialog will appear with a list of function categories.
. Choose Douse from the dialog box.
Set
.
Enter
Appendices
. Enter the
Set
355