Appendix C; Console Performance And Safety Check - smith&nephew VERSAJET II Manual De Instrucciones

EN EN

Appendix C

Console performance and safety check

Purpose
The purpose of this procedure is to provide a
performance and safety check for the VERSAJET™ II
console (66800039).
Important note: The VERSAJET II console is NOT
user serviceable and under no situation should the
casing be opened. Any attempt to open the unit by
the user will void all warranties and render the user
responsible for all subsequent repairs to the unit.
Contact your local Smith & Nephew Customer Care
representative or sales representative to resolve all
console problems.
Scope
This procedure is applicable to the VERSAJET II
console as a reference guide for customers and
service providers wishing to perform performance
checks. Refer to the VERSAJET II Hydrosurgery System
manual for additional information on the correct use of
the console and its specifications.
Equipment
Table 1
Optical tachometer
Electrical testing
equipment
Speed stick tool
VERSAJET II footswitch
VERSAJET II
Hydrosurgery System
manual
Ametek 1726 or
equivalent (hospital
is responsible for
purchase)
(hospital responsible for
purchase)
Smith & Nephew part
number 66801063
Smith & Nephew part
number 66800472
Smith & Nephew part
number 66800474
Performance check procedure
A checklist is provided at the end of this document to
record the results of the following checks.
Physical appearance check
1.
Make sure console is unplugged from electrical
power.
2.
Check console for visible dents, cracks or missing
pieces.
3.
Inspect console and fan ventilation slots located
on the bottom of the instrument. Remove
obstructions, dust or foreign materials using
vacuum and/or disposable wipes.
4.
Inspect console labels and markings for legibility
and partial or missing labels.
5.
Using the speed stick tool, check that the pump
interface rotates freely between UNLOCK and
LOCK position and back to UNLOCK.
6.
Check footswitch and footswitch cable for signs of
exposed wires, loose or missing insulation.
7.
Check footswitch mechanical operation for engage
and disengage by depressing the footswitch pedal
and releasing.
8.
Inspect the UP/DOWN toe buttons for excessive
wear.
9.
Inspect power cord for any frayed or missing
insulation; bent, loose or missing plug blades or
earth/ground.
System diagnostics check
1.
Make sure console is plugged into an electrical
outlet.
2.
Press the illuminated power switch to the ON
position and verify that the switch is illuminated
and green in color. Verify the light extinguishes
with the switch in the OFF position. Press the
power switch to the ON position.
3.
When power is turned ON, the VERSAJET II
console will perform the following visual
sequence for you to verify that system
indicator(s) are operating properly.
a. Verify that the footswitch connection LED
22 22