smith&nephew VERSAJET II Manual De Instrucciones página 23

indicator flashes amber ON/OFF
b. Verify that the system fault LED indicator
flashes red ON/OFF
c. Verify that the pump interface illuminated
green light ring flashes green ON/OFF
d. Verify that the power display flashes
88 ON/OFF
4.
Verify console defaults to power setting 01
when console is turned ON and after the visual
sequence is complete.
5.
Verify that no system fault is indicated (with red
LED). Note: A red LED indicates a system error that
will prevent the console from operating. If a system
fault is indicated, the console must be returned to
an authorized service center for repair.
Front panel layout
1.
Illuminated power switch – turns the power ON
and OFF
2.
Footswitch socket – interfaces with the
footswitch
3.
Power display – displays power setting
4.
Footswitch connection indicator (LED)
5.
System fault indicator (LED)
6.
Power controls – allows the user to sequentially
select power settings from 1 (lowest)
through 10 (highest)
1
2
4
6.
Verify the console power setting value changes
when arrows are pressed – there are a total
of ten different power settings. – Note: test
both switches on the front panel and also the
corresponding switches on the footswitch.
7.
Verify that the pump interface illuminated green
light ring is illuminated only when the pump
interface setting standard tool is locked in the
3 o'clock position
8.
Verify the amber footswitch connection LED is:
• ON when the footswitch connector is not
inserted into the footswitch socket.
• OFF when the footswitch connector is inserted.
3
6
5
7.
Illuminated green light ring – indicates positive
handset engagement
8.
Pump interface – interfaces and secures the
handpiece pump assembly to the console
9.
Key lock symbols – directs user to the open
(UNLOCKED) and the closed (LOCKED) handpiece
pump positions
10.
Type BF Applied Part – the handpiece has a type
BF rating
23
7
8
10
EN
9