smith&nephew VERSAJET II Manual De Instrucciones página 24

EN EN
Console speed check
1.
Insert the speed stick until fully seated into the
opening of the pump interface.
2.
Turn the speed stick tool to the LOCKED position.
3.
Set the console to the lowest power setting of 01.
4.
Depress and hold the footswitch DOWN to allow
the console to cycle its motor/transmission.
5.
Aim the tachometer optical beam so that the
reflector on the speed stick produces an RPM
reading.
6.
Measure speed (specification = 425 ± 50RPM).
7.
Set the console to the highest power setting of 10.
8.
Depress and hold the footswitch DOWN to allow
the console to cycle its motor/transmission.
9.
Aim the tachometer optical beam so that the
reflector on the speed stick produces an RPM
reading.
10.
Measure speed (specification = 1290 ± 100RPM).
24 24