Stryker SIDNE Suite Manual Del Usuario página 31

Software card detected,
please stand by
Invalid card detected, please
disconnect
Invalid SFB software version
System error
Goodbye
Camera
SIDNE Says
Camera...
Shutter manual
Shutter automatic
White balance complete
White balance invalid
SIDNE recognizes a software dongle
that has been inserted into the USB
port on the front panel. Wait for
further instruction.
SIDNE does not recognize a software
dongle that has been inserted into the
USB port on the front panel. Remove
the dongle.
The software that controls firewire
devices in invalid. Contact technical
support (+1.800.624.4422).
SIDNE has encountered an error.
Reboot the system. If the problem
persists, contact technical support
(+1.800.624.4422).
The system has been powered off and
SIDNE is shutting down.
Meaning
Added as a prefix to camera-related messages.
The camera shutter has been set to manual
control.
The camera shutter has been set to automatic
control.
The white balance operation has completed.
The white balance operation was not successful.
27