HEADLIGHT BULB REPLACEMENT
The headlight (1) is of LED type. If it does not work, it
must be replaced.
52
EN -
TAIL LIGHT
The tail light (1) is of LED type. If it does not work, it
must be replaced.
PLATE LIGHT BULB REPLACEMENT
Unscrew the screw (1) and remove the plate light (2)
-
from the mudguard;
remove the bulb holder (3) and the bulb (4) from the
-
support;
pull the bulb (4) to slide it out of bulb holder;
-
After replacement, refit following the procedure in
reverse order.