THROTTLE CONTROL CABLE ADJUSTMENT
To check proper adjustment of the throttle control
transmission, operate as follows:
move the upper rubber cap (1);
-
move the transmission (2) back and forth to check
-
that there is a clearance of approx. 2 mm;
if this is not the case, release the lock nut (3) and
-
properly turn the adjusting screw (4) (unscrew to
reduce clearance, screw to increase it);
tighten back the lock nut (3).
-
28
EN -
WARNING
Using the motorcycle with a damaged
throttle control cable considerably
compromises safe riding.
WARNING
Exhaust gas contains poisonous carbon
monoxide. Never run the engine indoor.