CONTROLS
IGNITION SWITCH
The ignition switch has two positions:
motorcycle start position
(non-removable key).
key removal position.
Key removal position
•
Turning the key to
position, the engine and the
lights go off and you can remove the key from the
ignition switch.
Start position
•
From key removal position, turn the key (1) clockwise
to
position. Lights and display come on, and the
motorcycle can be started.
14
EN -
STEERING LOCK
The motorcycle is equipped with a steering lock (1) on
the right side of the steering head tube.
Lock the steering as follows:
turn the handlebar to the left;
-
insert the key into the lock and turn it counter-
-
clockwise;
push it inside and, if necessary, turn the handlebar in
-
both directions;
turn the key clockwise and remove it from the lock.
-
To unlock the steering, follow the above procedure in
reverse order.
WARNING
Do not turn the handlebar with the key into
the steering lock, to avoid breaking it.
HANDLEBAR SWITCHES
Right-Hand Side
The right-hand switch features the following controls:
1.
Engine start button.
2.
Engine KILL SWITCH.