ENGINE OIL CHANGE
Note
Carry out this operation with the engine hot.
WARNING
Be careful not to touch the hot oil.
Remove the oil filler cap (1);
-
remove the lower protection (2) by unscrewing
-
screws (3) and (4);
place a pan under the engine;
-
remove the oil drain cap (5);
-
drain the waste oil and clean the magnet on the cap;
-
refit the drain cap (5) to 25 Nm (2.5 kgm, 18.43 ft/
-
lb) and the engine protection (2) by tightening the
screws to 12 Nm (1.2 kgm, 8.85 ft/lb);
pour the provided quantity of oil.
-
25
EN -