Kia Sorento 2011 Manual Del Usuario página 941

Second Generation XM (2011-2015) / Kia Sorento XM 2011-2015 Service Manual / Brake System
Kia Sorento: Brake System - Parking Brake System - Parking Brake Assembly Installation
Parking Brake Shoe
Install the shoe hold down pin (A) and spring (B) by pressing and rotating the spring.
1.
Install the operating lever assembly (D) and the upper return spring (C).
2.
Install the adjuster assembly (B) and the lower return spring (A).
3.
Install the hub assembly.
4. (Refer to Drive shaft and axle - "Rear hub - carrier")
Install the parking brake cable (B), and then install the fixing clip (A).
5.
Install the rear brake disc, then adjust the rear brake shoe clearance.
Remove the plug from the disc.
(1)
Rotate the toothed wheel of adjuster by a screw driver until the disc is not moving, and then return it by 5 notches in the opposite direction.
6. (2)
7. Install the brake caliper assembly.
www.bestservicemanual.com