Overview; Connections On The Control Unit - Porsche Mobile Charger Connect Manual De Instrucciones

Password for web application
The password is used for logging into the Web Appli-
cation.
When using the initial password:
e
If you lose or forget the initial password, contact
your Porsche partner.
When using a password you set yourself:
e
If you lose or forget a password you set yourself,
reset the charger to factory settings and re-acti-
vate the initial password (Settings
settings)
Serial number of the charger
The serial number of the charger can be found in the
following places:
–
In the letter containing access data after the
designation Serial NumberSerial Number
–
On the identification plate (on the back of the
control panel) after the abbreviation SNSN
– On the high-voltage charger: Settings
Maintenance e Device information
In the Web Application: Settings e Maintenance
–
e Information
Porsche ID
When the charger is paired to your Porsche ID , infor-
mation about the charger and the charging processes
can be displayed in My Porsche and in the Porsche
Connect App .
If you will no longer be using the charger, e.g. if you
sell it:
1. Unpair the charger from your PorscheID (Set-
e User profiles).
tings
2. Reset the charger to factory settings (Set-
e Factory settings).
tings
e Factory
e

Overview

Connections on the control unit

Fig. 24: Connections on the control unit
A Supply cable
B Vehicle cable
The supply cable A can be removed and inserted at
the top of the control unit.
The vehicle cable B is removed and inserted at the
bottom of the control unit.
Overview
55