Porsche Mobile Charger Connect Manual De Instrucciones página 84

Malfunctions
Situation
The charging current is too low (message on display).
The mains voltage is too high (message on display).
The charger is not within the permitted temperature range (message on display).
The circuit breaker in the domestic installation was triggered (message on dis-
play).
A charging interruption is display:
e
Power button lights up white
e
Status LEDs flash blue.
e
The display switches on.
82
Recommended action
e
The home network is overloaded. Switch off other higher electrical loads.
e
Have the domestic installation checked by a qualified electrician.
e
Device temperature switch-off: Avoid direct sunlight and allow the charger
to cool down slowly on its own.
e
Low-temperature switch-off: Let the charger warm up in a warm environ-
ment before using it.
e
Device temperature sensor faulty: Have the charger replaced.
e
Reduce the charging current in the settings on the charger.
e
Acknowledge any error message that appears.
e
Wait until the vehicle starts charging again automatically.
e
Charging can be stopped on the vehicle.