Logging Into The Web Application - Porsche Mobile Charger Connect Manual De Instrucciones

Operating
Vehicle list (register vehicle)
After entering the PIN, a question is asked whether
the vehicle should be included in the vehicle list of
the Mobile Charger Connect . With consent, a one-
time pairing of the vehicle with the Mobile Charger
Connect immediately recognises the vehicle after the
charging cable is plugged in and the charging process
is enabled. For all other charging operations with this
vehicle, it is therefore no longer necessary to enter a
PIN.
Opening vehicle list
Several vehicles can be registered on the Mobile
Charger Connect . Each vehicle is listed separately
in the vehicle list.
e e Select vehicle list .
Settings
Vehicles can be removed again using this list.
Activating and deactivating ground
monitoring
Electric shock, short cir-
DANGER
cuit, fire, explosion
Use of the charger without active ground monitoring
can cause electric shocks, short circuits, fire, explo-
sions or burns.
e
The charger should preferably be operated in
earthed mains supply systems.
e
Only deactivate ground monitoring in non-
earthed mains supply systems.
e
Activate ground monitoring in earthed mains
supply systems.
g Refer to chapter "Activating ground monitoring" on
page 72.
72
Deactivating ground monitoring
b An error message indicating an interrupted or
absent protective conductor is shown on the dis-
play.
b Ground monitoring has interrupted the charging
process or prevents it from starting.
Power button lights up red.
Status LEDs light up red.
An error message is shown on the display.
1. To deactivate ground monitoring, acknowledge
the error message with Confirm.
2. Press and hold the Power button
onds.
3. Acknowledge the deactivation of ground moni-
toring with Confirm.
�� Monitoring remains deactivated for subse-
quent charging processes.
Activating ground monitoring
If the charger is operated in an earthed mains supply
system, activate ground monitoring.
1. Open the Ground monitoring menu (Set-
e Ground monitoring).
tings
2. Activate ground monitoring with Activate.
When ground monitoring is activated, the
Ground monitoring menu item will not appear
in the Settings menu.

Logging into the web application

For standard use of the Web Application, select the
Home user type of user. The Customer service user
has additional setting options and is intended for your
Porsche partner for service purposes.
b The access data is to hand.
1. Select the appropriate user in the User field.
2. Enter the password (from the letter containing
access data).
Information
After 25 minutes of inactivity, the user is automati-
cally logged out of the Web Application.
Opening the web application
Additional configuration options and detailed infor-
mation on existing charging processes are available
using a Web Application designed specifically for
for 3 sec-
each charger.
Information
− Depending on which browser you are using, the
Web Application may not open immediately. In-
stead, a notice regarding the browser's security
settings may be displayed first.
−
You may have to enter the network key when
opening the Web Application. This depends on
your device's operating system.
Opening the web application via hotspot
The web application can be opened using a device
(PC, tablet or smartphone) via a hotspot set up by the
charger.
To set up a hotspot:
e
Refer to chapter "Hotspot" on page 68.
e
To open the Web Application when a hotspot
is active, enter the following IP address in the
address line of your browser: 192.168.0.1