Orbitalum ORBIWELD 38S Manual De Instrucciones página 31

ORBIWELD 38S, 76S, 115S, 170
ENGLISH
Table of contents
1. ABOUT THESE INSTRUCTIONS ....................................... 33
1.1 Warning messages ................................................ 33
1.2 Further symbols and displays ............................... 33
1.3 Abbreviations ........................................................ 33
1.4 Further applicable documents .............................. 33
2. INFORMATION AND SAFETY INSTRUCTIONS FOR THE
RESPONSIBLE BODY ....................................................... 34
2.1 Requirements for the responsible body ............... 34
2.2 Using the machine ................................................. 34
2.2.1 Proper use ................................................. 34
2.2.2 Machine constraints .................................. 35
2.3 Environmental protection/disposal ...................... 35
2.3.1 REACh (Registration, Evaluation,
Authorization and Restriction of
Chemicals) ................................................. 35
2.3.2 Cooling liquid ............................................ 35
2.3.3 Electric tools and accessories ................... 36
2.4 Personnel qualification ......................................... 36
2.5 Fundamental instructions on operational safety .. 36
2.6 Personal protective equipment ............................. 36
2.7 Remaining risks ..................................................... 37
2.7.1 Injury through high weight ........................ 37
2.7.2 Prick injury through pointed electrode ..... 38
2.7.3 Danger of crushing through rotating rotor 38
2.7.4 Danger of crushing through being caught
in by moving parts ..................................... 38
2.7.5 Danger of cuts at sharp edges ................... 38
2.7.6 Burns and danger of fire through high
temperatures ............................................ 38
2.7.7 Tripping over the hose package ................ 39
2.7.8 Electric shock ............................................. 39
2.7.9 Damage to eyes through radiation ............ 39
3. DESCRIPTION ................................................................. 40
4. SCOPE OF APPLICATION ................................................. 41
4.1 Types ..................................................................... 41
[REV. 20230213] OW_ORBIWELD_BA_821060201_00__INH_EN
4.2 Inserts ................................................................... 41
4.2.1 Clamping inserts ....................................... 41
4.2.2 Cavity inserts for moldings ........................ 41
4.2.3 T-piece clamping inserts ........................... 41
4.2.4 Inserts for elbow welding ......................... 42
4.2.5 Electrode adapters made of brass ............ 42
4.2.6 Electrode adapters for head seam
welding ...................................................... 42
4.2.7 Electrode adapter for inside welding ........ 43
4.2.8 Hose package extensions .......................... 43
5. TECHNICAL SPECIFICATIONS ......................................... 43
5.1 Application range .................................................. 43
5.2 Dimensions ...........................................................44
6. STORAGE AND TRANSPORT ........................................... 46
6.1 Gross weights ........................................................ 46
6.2 Transporting the weld head .................................. 46
6.3 Preparing storage .................................................. 47
7. INITIAL OPERATION ....................................................... 47
7.1 Included with the machine.................................... 47
7.2 Accessories (available option) ............................... 48
7.3 Checking the parts of delivery ............................... 48
7.4 Preparing initial operation .................................... 48
8. SET-UP AND ASSEMBLY ................................................. 49
8.1 Procedure .............................................................. 49
8.2 Connecting the welding power supply .................. 49
8.3 Mounting the clamping inserts ............................. 50
8.4 Setting up the electrode ........................................ 50
8.5 Clamping the workpieces ...................................... 51
8.6 Carrying out the gas and cooling-liquid function
test ........................................................................ 52
8.7 Connecting the accessories ................................... 52
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
31