Orbitalum ORBIWELD 38S Manual De Instrucciones página 41

ORBIWELD 38S, 76S, 115S, 170
4. SCOPE OF APPLICATION
4.1 Types
Tube OD
min. .... max.
Welding process
Materials
4.2 Inserts
4.2.1 Clamping inserts
Made of aluminum. 1 set of clamping inserts consists of 2 parts for 1 clamping side.
2 clamping inserts (= 4 parts) are required for each tube dimension.
For the ORBIWELD 115, 115S and 170 you can choose between wide "W" and small "S"
clamping inserts which can be combined with one another as desired.
4.2.2 Cavity inserts for moldings
Clamping inserts for welding of shaped pieces (e.g. flanges, flanged wheels and screw
fittings in the food industry). 1 cavity insert consists of 2 half shells.
The following are required for each task and dimension:
• 1 chamber insert
• 1 electrode adapter set
• 1 clamping insert
4.2.3 T­piece clamping inserts
Clamping inserts with the ability to clamp the hollowed tube and the tube to be welded.
The following are required per task and dimension:
• 1 T-piece clamping insert
• 1 electrode adapter set
• 1 clamping insert
[REV. 20230213] OW_ORBIWELD_BA_821060201_00__INH_EN
uNIT
OW 38S
[mm] 3.0 ... 38.1
[inch] 0.125 ... 1.5
Tungsten inert gas (TIG)
All materials that are fundamentally suitable for the TIG welding process.
Scope of application
ORBIWELD
OW 76S OW 115S
6.0 ... 77.0 20.0 ... 115.0
0.25 ... 3.0 0.75 ... 4.5
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
OW 170
50.0 ... 170.0
2.0 ... 6.0
41