Orbitalum ORBIWELD 38S Manual De Instrucciones página 48

ENGLISH
Initial operation
CONTENTS
Hexagon screwdriver 2.5x75
Hexagon screwdriver 2.0x60
Slot screwdriver 3.0x0.5x100
Hexagon screwdriver 3.0x75
Electrode clamping screw OW 38S
Electrode clamping screw OW 76S/OW 115S
Electrode clamping screw OW 170
Electrode distance gage ORBIWELD
7.2 Accessories (available option)
• Clamping inserts, small and wide
• Plastic case for clamping inserts
• Cavity inserts for moldings
• Inserts for elbow welding
• T-piece clamping inserts
• Electrode adapters
• Table mounts
• ESG tungsten grinders
• ORBmax residual oxygen meter
• ORBIPURGE forming set
• Hose package extensions
• WS2 tungsten electrodes
7.3 Checking the parts of delivery
X Check delivery for completeness and damage caused by transport.
X Report any missing parts or damage caused by transport to your supplier immediately.
7.4 Preparing initial operation
Prerequisite: Welding power supply connected and ready to operate.
X Check the weld head, hose package and lines for damage.
X Check the working environment for possible sources of danger and, if applicable, eliminate these.
X Fill the weld head with cooling liquid (see chap. 8.6, p. 52).
X Check the weld head for loose parts and particles.
48
ORBITALuM TOOLS GmbH D-78224 Singen www.orbitalum.com
TOOL SET
OW 38S OW 76S
X X
X X
— —
— —
X X
— X
— —
X X
ORBIWELD 38S, 76S, 115S, 170
OW 115S OW 170
X X
X X
— X
— X
X —
X —
— X
X X
[REV. 20230213] OW_ORBIWELD_BA_821060201_00__INH_EN