Orbitalum ORBIWELD 38S Manual De Instrucciones página 47

ORBIWELD 38S, 76S, 115S, 170
2. Use the handle to remove the weld head from the transport
case.
6.3 Preparing storage
Carry out the following steps before storage:
1. Remove the electrode.
2. If appropriate, remove the clamping inserts.
3. Disconnect the weld head from the welding power supply.
4. Place the end caps for cooling liquid over the cooling liquid connections.
5. Place the weld head in the transport case. Ensure that the hose package is not twisted or squeezed.
Carry out the following steps additionally before longer storage periods:
6. Remove the cooling liquid completely (by means of compressed air).
7. Clean the surfaces.
7. INITIAL OPERATION
7.1 Included with the machine
• 1 x Enclosed orbital weld head ORBIWELD
• 1 x Tool set (see table)
• 1 x Operating instructions
• 1 x Spare parts list
• 1 x Durable storage and shipping case
CONTENTS
Toolbox
Transparent rectangular box
Slot screwdriver 2.5x0.4x60
Hexagon screwdriver 1.3x40
Hexagon screwdriver 1.5x50
[REV. 20230213] OW_ORBIWELD_BA_821060201_00__INH_EN
TOOL SET
OW 38S OW 76S
X X
X X
X X
X X
X X
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
Initial operation
OW 115S OW 170
X
X
X
X
X
ENGLISH
X
X
—
—
X
47