Orbitalum ORBIWELD 38S Manual De Instrucciones página 35

ORBIWELD 38S, 76S, 115S, 170
• Use of the machine solely in its original state.
• Usage solely of original accessories as well as original spare parts and operating materials.
• Checking of all the safety-relevant components and functions before commissioning.
• Processing of those materials named in the operating instructions.
• Purpose usage of all components involved in the welding processes as well as of all further factors that have an influence on
the welding process.
• Solely commercial usage.
2.2.2 Machine constraints
• The workplace can be in tube preparation, in plant construction or in the plant itself.
• The machine is operated by one person.
• Erect the machine solely on a solid surface.
• A radial space requirement/freedom of movement of approx. 2 m around the machine is required for people.
• Work lighting: min. 300 lux.
• Climate conditions: –15 °C to 40 °C; < 80% rel. humidity.
• Only work with the machine in dry surroundings (not in misty, rainy or stormy conditions). If appropriate use a welding tent.
2.3 Environmental protection/disposal
2.3.1 REACh (Registration, Evaluation, Authorization and Restriction of Chemicals)
Regulation (EC) 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation
and Restriction of Chemicals (REACh) regulates the manufacture, placing on the market and use of chemical substances and
mixtures made from them.
In terms of the REACh regulation, our products are products. According to article 33 of the REACh regulation, suppliers of articles
must inform their customers if the delivered article contains a substance of the REACh candidate list (SVHC list) in contents greater
than 0.1 mass percent. On 27.06.2018 lead (CAS: 7439-92-1 / EINECS: 231-100-4) was added to the candidate list SVHC. This
inclusion triggers an information obligation in the supply chain.
We hereby inform you that individual components of our products contain lead in contents of more than 0.1% by weight as an alloy
component in steel, aluminium and copper alloys as well as in solders and capacitors of electronic components. The lead contents
are within the defined exceptions of the RoHS directive.
As lead is firmly bound as an alloy component and therefore no exposure is to be expected when used as intended, no additional
information on safe use is necessary.
2.3.2 Cooling liquid
Dispose of cooling liquid in accordance with the local statutory regulations.
[REV. 20230213] OW_ORBIWELD_BA_821060201_00__INH_EN
Information and safety instructions for the responsible body
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
ENGLISH
35