Publicidad
Idiomas disponibles
Idiomas disponibles
PORTUGUÊS
SVENSKA
3 OPERATION
(Refer to Page 5)
PREPARATION
1. CHECKING CONNECTIONS
• Make sure that all the connections are proper by refer-
ring to the rear panel.
• Check the polarity (positive and negative) of connec-
tions, and the directivity of stereo separation (right cord
to right channel terminal, and left cord to left channel
terminal).
• Check the directivity of pin cord connection.
2. SETTING OF EACH KNOB
• Turn the volume control knob
position.
• Set the tone controls
3
center position.
• Set the LOUDNESS switch
• Set the SOURCE DIRECT switch
After checking the above items, turn on the power, the ampli-
fier is set in the ready mode in a few seconds.
PLAYING A RECORD
1. Set the CARTRIDGE selection switch
"MM (
)".
2. Set the INPUT SELECTOR switch
3. Operate the turntable and play the record.
4. Turn the volume
and tone controls
7
ance control
to yield an appropriate volume and
6
sound quality.
PLAYBACK OF CD PLAYER
1. Set the INPUT SELECTOR switch
2. Operate the CD player.
3. Turn the volume
and tone controls
7
ance control
to yield an appropriate volume and
6
sound quality.
RECEPTION OF RADIO PROGRAMS
1. Set the INPUT SELECTOR switch
2. Operate the tuner to receive a radio program.
3. Turn the volume
and tone controls
7
ance control
to yield an appropriate volume and
6
sound quality.
CONNECTIONS OF AUDIO EQUIPMENT TO DVD/
AUX TERMINALS
1. Set the INPUT SELECTOR switch
position.
2. Operate the Audio equipment Systems.
3. Turn the volume
and tone controls
7
ance control
to yield an appropriate volume and
6
sound quality.
NEDERLSNDS
ESPAÑOL
left (
), to minimum
7
,
and balance control
4
6
to "OFF (
)".
5
to "OFF (
)".
10
"MC (
)" or
17
to "PHONO".
9
,
and bal-
3
4
to "CD".
9
,
and bal-
3
4
to "TUNER".
9
,
and bal-
3
4
to "DVD/AUX"
9
,
and bal-
3
4
ITALIANO
PLAYBACK WITH TAPE DECK, DAT, MD
1. Set the INPUT SELECTOR switch
or "TAPE-2/MD".
2. Operate the Tape Deck, DAT, MD.
3. Turn the volume
7
ance control
to yield an appropriate volume and
6
sound quality.
RECORDING WITH TAPE DECK, DAT, MD
1. Set the REC OUT SELECTOR switch
source you wish to record.
2. Start the playback of the program source.
3. Start recording with the component connected to "TAPE-
to
1/DAT" or "TAPE-2/MD".
• In the PMA-1500RII, the REC OUT signal and the
speaker (headphone) signal are output via separate cir-
cuits so that knobs and switches related to the tone and
volume have no effect what so ever on the sound that is
recorded. Also, since the recording function is selected
by the REC OUT SELECTOR switch
gram source can be played through the speakers (or
headphones) even during recording.
MONITORING THE RECORDING
• A recording in progress can be monitored if a tape deck
with three individual heads for recording and playback
is used. A tape deck in which a common head is used
for both recording and playback cannot be used to mon-
itor recording.
When a recording is being made using TAPE-1/DAT,
selecting TAPE-1/DAT with the INPUT SELECTOR will
engage the RECORDING MONITOR and permit a
check of the recording condition.
FRANCAIS
DEUTSCH
to "TAPE-1/DAT"
9
and tone controls
,
and bal-
3
4
to the program
8
, the free pro-
8
ENGLISH
11
Publicidad
