Daub DR Manual De Usuario página 48

Figure Greasing the console shafts and brass guide blocks
7
Figure Greasing the plastic slider and cross bearing
8
NOTICE
• As lubricant, we recommend a PTFE EP-2 grease that conforms to the DIN 51502, ISO 6743, ISO-
L-XCGHA2 and KFK2U-35 standards.
• Make sure that there are no dough rests between the rounding table and rounding plate,
because this will cause damage to the dividing disc and rounding plate while working.
8.3. Cleaning the dividing knife and dividing disc
8.3.1. Required tools
• Brush
• Plastic scraper
8.3.2. Supplied tools
• Pipe spanner
DR | User manual
1
2
1
2
1
48
www.daub.nl