Daub DR Manual De Usuario página 53

8.4. Cleaning under the rounding table
8.4.1. Required tools
• Brush
• Damp cloth
• Plastic scraper
• Compressed air
8.4.2. Instructions
1. Remove the rounding table by firmly striking it on the underside.
2. Clean the area under the rounding table with a brush, damp cloth, plastic scraper or compres-
sed air.
3. Re-grease the four recesses of the plastic slider and the bearing.
4. Place the rounding table back in position, and make sure the round opening is correctly
pressed onto the bearing. Press the rounding table firmly in place, and check that it is laying
straight.
Press the rounding table firmly downwards and check if it is lying flat.
NOTICE
The rounding table must lie flat.
8.5. Spare parts
Order spare parts from your dealer or the Daub service department.
Have a qualified service technician install the spare parts. Otherwise, contact your dealer or the
Daub service department.
DR | User manual
53
www.daub.nl