Publicidad
•
Stop the engine and disengage drive to attachment
-
before refueling;
- before removing the grass catcher;,
-
before making height adjustment unless adjustment
can be made from the operator's position.
•
Reduce the throttle setting during engine run-out and, if
the engine is provided with a shut-off valve, turn the fuel
off at the conclusion of mewing.
IV. Maintenance
and Storage
Keep all nuts, boils and screws tight to be sure the equip
merit is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
•
To reduce the fire hazard, keep the engine, silencer, bat-
tery compartment and petrel storage area free of grass,
leaves, or excessive grease.
•
Check the grass catcher frequently for wear or dete-
rioration.
•
Replace worn or damaged parts for safety.
if the fuel tank has to be drained, this should be done
outdoors.
•
On multi-bladed machines, take care as rotating one blade
can cause other blades to rotate.
When machine is to be parked, stored or left unattended,
Iowerthe cutting means unless a positive mechanical lock
is used.
WARNING: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent accidental
starting when setting
up, transporting,
adjusting or making repairs.
4
Publicidad
