Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
Make sure that the oven has
cooled down before carrying out
any maintenance or cleaning.
Do not use steam cleaners.
EXTERIOR SURFACES
. Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
. Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with a
damp microfibre cloth.
INTERIOR SURFACES
. After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove any
deposits or stains caused by food residues To dry any
condensation that has formed as a result of cooking
foods with a high water content, let the oven to cool
completely and then wipe it with a cloth or sponge.
. Activate the "Smart Clean" function for optimum
cleaning of the internal surfaces.
. Clean the glass in the door with a suitable liquid
detergent.
. The oven door can be removed to facilitate cleaning.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they
are still hot. Food residues can be removed using a
washing-up brush or a sponge.
WATER DRAWER MAINTENANCE
Caution: The water drawer is not suitable for dishwasher
use: risk of damage!
At the end of each cooking cycle with steam, after
about 30 min the oven automatically performs a drain
cycle lasting about one minute, thus transferring all
the water in the system to the extractable drawer. Once
completed the auto-drain, proceed as follows:
1. Press the top of the drawer front cap, indicated with
a recess, to pull out the handle
REPLACING THE LIGHT
1. Disconnect the oven from the power supply.
2. Unscrew the cover from the light, replace the bulb
and screw the cover back on the light.
3. Reconnect the oven to the power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
2. Grasp the handle and pull out the water drawer.
3. Remove the lid of the water drawer.
4. Empty the water drawer and clean it.
5. Dry the different components by using a soft cloth.
6. If necessary, allow the drawer to air dry without
7. Replace the water drawer lid.
8. Re-insert the washed and dried removable water
9. Press the bottom of the drawer front cap to
Note: If needed, a manual drain cycle can be performed: press
the Cleaning icon
the + and - buttons, select the Drain option and press the
icon
conveying it to the extractable drawer.
Note: Avoid to leave the water in the system more than 2
days.
Use only room temperature water when filling the water
drawer: hot water may affect the operation of the steam
system. Use only drinking water.
BOILER
To ensure that the oven always works at optimum
performance and to help prevent the build-up of
limescale deposits over time, we recommend using the
"Drain" and "Descale" functions regularly.
After a long period of non-use of the "Forced Air +
Steam" function, it is higly suggested to activate a
cooking cycle with the empty oven by filling completely
the tank.
Please note: Only use 40 W/230 ~ V type G9, T300°C halogen
bulbs. The bulb used in the product is specifically designed
for domestic appliances and is not suitable for general room
lighting within the home. Light bulbs are available from our
After-sales Service.
- If using halogen bulbs, do not handle them with your bare
hands as your fingerprints could cause damage. Do not use
the oven until the light cover has been refitted.
Wear protective gloves.
The oven must be disconnected
from the mains before carrying out
any kind of maintenance work.
closing it with the lid.
drawer into its housing making sure to push it all the
way down
reposition the handle.
on the UI panel and by navigating with
to start. The oven will drain the water in the system,
Publicidad
