Whirlpool AKZ9S 8260 FB Manual Del Usuario página 6

3. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, by pressing
start immediately the function.
Please note: Once a function has been selected, the display
will recommend the most suitable level for each function.
At any time you can stop the function that has been activated
by pressing .
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the
display. Press to return to previous screen and select
a different function or wait for a complete cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature, requiring to "ADD FOOD".
At this point, open the door, place the food in the oven,
close the door and start cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the
oven to reach using
5. PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily
paused through deactivating heating elements.
To resume the cooking, close the door.
Some 6th Sense functions will require the food to be
turned during cooking.
TURN FOOD
An audible signal will sound and the display the display
shows the action to be done. Open the door, do the
action prompted by the display and close the door and
resume cooking.
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
CHECK ON FOOD
An audible signal will sound and the displays shows the
action must to be done. Check the food, close the door
and resume cooking.
the oven will
or .
Please note: Press to skip these actions. Otherwise, if no
action is done after a certain time the oven will continue the
cooking.
6. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
END
Press to continue cooking in manual mode (untimed)
or press to extend the cooking time by setting a new
duration. In both cases, the cooking parameters will be
retained. Once the food has been removed, leave the
oven cooling down with the door closed.
BROWNING
Some functions of the oven enable you to brown the
surface of the food by activating the grill once cooking
is complete.
PRESS v TO BROWN
When the display shows the relevant message, if
required press to start a five-minute browning cycle.
You can stop the function at any time by pressing
switch the oven off.
. FAVORITES
Once cooking is complete the display will prompt you
to save the function in a number between 1 and 10 on
your list of favorites.
ADD FAVORITE?
If you would like to save a function as a favorite and
store the current settings for future use, press
otherwise, to ignore the request press
Once has been pressed, press the
number position, then press
Please note: If the memory is full or the number chosen has
already been taken, the oven will ask you to confirm
overwriting the previous function.
To call up the functions you have saved at a later time,
press : The display will show your list of favorite
functions.
1. CONVENTIONAL
Press or to select the function, confirm by pressing
, and then press
.
or to select the
to confirm.
to activate.
to