Whirlpool AKZ9S 8260 FB Manual Del Usuario página 4

FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time when
you switch on the appliance for the first time: "English"
will show on the display.
1. English
Press or to scroll through the list of available
languages and select the one you require.
Press to confirm your selection.
Please note: The language can subsequently be changed by
selecting "LANGUAGE" in "SETTINGS" menu, available by
pressing .
2. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of electrical
power that is compatible with a domestic network that
has a rating of more than 3 kW (16): If your household uses
a lower power, you will need to decrease this value (13).
POWER
Use navigation button + and - to select 16 "High" or 13
"Low" and press to confirm.
3. SET THE TIME
After selecting the power, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press or to set the corrent hour and press
two digits for the minutes will flash on the display.
Press or to set the minutes and press
DAILY USE
1. SELECT A FUNCTION
Press to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon for
one of the main functions or by scrolling through a
menu: To select an item from a menu (the display will
show the first available item), press
desired one, then press
2. SET THE FUNCTION
After having selected the function you require, you can
change its settings. The display will show the settings
that can be changed in sequence. Pressing
you to change the previous setting again.
to confirm.
or to select the
to confirm.
allows
Please note: You may need to set the time again following
lengthy power outages. Select "CLOCK" in "SETTINGS" menu,
available by pressing
4. SET THE WATER HARDNESS LEVEL
In order to allow the oven to work efficiently, and to
guarantee that it regularly prompts the user to perform
Descale cycle when needed, it is important to set the
correct water hardness level. To set it, switch on the oven
by pressing
buttons and
to confirm. Use navigation buttons
the correct level for the water of your area, based on the
following table:
WATER HARDNESS LEVELS TABLE
Level
1 Very soft
2 Soft
3 Mid
4 Hard
5 Very hard
Press to confirm.
For Water Hardness level, "Hard" is preset.
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal. Before starting to cook food, we therefore
recommend heating the oven with it empty in order to
remove any possible odours. Remove any protective
cardboard or transparent film from the oven and
: The
remove any accessories from inside it. Heat the oven to
200 °C for around one hour, ideally using a function with
air circulation (e.g. "Forced Air" or "Convection Bake").
Please note: It is advisable to air the room after using the
appliance for the first time.
TEMPERATURE / GRILL LEVEL / STEAM LEVEL
TEMPERATURE
When the value flashes on the display, press
change it, then press
the settings that follow (if possible).
In the same way, it is possible to set the grill level: There
are three defined power levels for grilling: 3 (high), 2
(mid), 1 (low). In "Forced Air + Steam" function, you can
select the amount of steam from the following values:
STEAM 1, STEAM 2.
Please note: Once the function has been activated, the
temperature/grill level can be changed using
, press Settings and use navigation
to select "WATER HARDNESS". Press
and
°dH °fH
German French
degrees degrees
0-6 0-10
7-11 11-20
12-16 21-29
17-34 30-60
35-50 61-90
to confirm and continue with
to select
°Clark
English
degrees
0-7
8-14
15-20
21-42
43-62
or to
or .