Publicidad
!
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF BEFORE
Filling the Clean Water Tank
To fill clean water tank, lift cover flap.
Add cleaning chemicals to the tank following the manufacturers guidlines.
Note: A filter basket ensures that contaminants (i.e. leaves, hair, dirt, etc.) are not allowed to enter the clean water tank
during the filling process. Periodically inspect and clean if necessary.
!
Always ensure that chemical manufacturer's safety guidelines are followed.
Fill-Level Indicator
The water level in the clean
water tank can be measured
using the visible float inside the
clean water dump hose located
on the rear of the machine.
Do not overfill the clean water
tank.
Machine Set-up Guide
GB
MAKING ANY ADJUSTMENTS.
The TVL850 is equipped with a large capacity 120 litre clean water tank,
allowing for large areas to be covered in a single fill.
Unscrew and and remove filler cap.
WHEN HANDLING AND MIXING CHEMICALS
37
!
Fill tank using a hose
or other preferred method.
!
Publicidad
