Publicidad
!
DO NOT OPERATE THE
MACHINE ON INCLINES
THAT EXCEED 11%.
Machine in Use
Set lever to forward.
!
NOTE: MACHINE WILL NOT REVERSE WITH
FLOOR TOOL IN THE LOWERED POSITION
Water flow rate selection.
Brush deck in lowered position.
Off-aisle Cleaning Kit
(Optional Extra Accessory) 606182
The optional off-aisle cleaning kit gives added flexibility
to the operator.
The kit can be used to clean hard to reach / inaccessible areas.
Remove the vacuum hose from the floor tool and attach to the
off-aisle kit.
To operate the vacuum, press the vacuum switch on.
Note: Return the hose to the floor tool once finished using
the off-aisle facility.
Saugtaster/ Bouton de l'aspirateur/ Stofzuigerschakelaar/ Interruptor
de vácuo/ Interruttore aspiratore/ Interruptor de aspiración/ Włącznik
ssania/ Dammsugaromkopplare/ Alipainekytkin/ Vakuumkontakt
!
To operate, select forward and depress the accelerator pedal.
Vacuum pick-up and water flow will turn on if selected and providing the brush and floor tool are in
the lowered position, the machine will move forward.
Clean water is dispersed evenly via 'THRU- FEED' scrubbing brushes.
The waste water is then retrieved by the suction floor tool.
Overlap each scrubbing path by 10cm to ensure an even clean.
After stopping, let the vacuum motor run for 10 seconds to collect any water left in the vacuum
hose, then switch the vacuum motor off.
On heavily soiled floors use a 'double scrub' technique.
First pre-scrub the floor with the floor tool in the raised position, allow the chemicals time to work,
then scrub the area a second time with the floor tool lowered.
If your machine leaves streaks on the cleaned floor,
either clean the floor tool blade or adjust blade height
for optimum performance.
Floor tool lever in lowered position.
Machine Operation
GB
Low
!
Vacuum switch.
59
High
Adjusting the blade height.
Publicidad
