Descargar Imprimir esta página

iM3 EVOLUTION Serie Instrucciones Para El Uso página 15

Las unidades dentales veterinarias

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 118
USER'S MANUAL
SWITCH THE UNIT ON
Switch the unit ON (and OFF) using the main switch (see Fig. 7)
The Unit is ready for use after the compressor has reached
pressure or the monitor has switched ON, whichever is last.
The compressor motor will switch OFF when the air tank
is filled. The compressor motor will switch ON and OFF
automatically as more air is needed.
Incase of emergency, use this switch to turn
Off the unit.
INSTRUMENT BRIDGE IN START POSITION
Always place the handpieces in the start
position in the instrument bridge when
placing the animal on and off the table as
shown below.
All instruments should be placed into the instrument holders
in the instrument bridge (as pictured Fig. 8) when not in use.
This reduces the likelihood of the instruments being damaged
if they are knocked off the table and hit the ground.
Instrument Bridge from left to right (fig.8)
a.
Suction
b. Ultrasonic Scaler
c.
3-1 air water syringe
d. Low Speed Air (air instrument)
e.
High Speed Air (air instrument)
f.
Electric Micromotor
Please refer to the supplied instrument
manuals that comes with each handpiece for
relevant information on your instruments
EVOLUTION VETERINARY DENTAL UNITS
Fig. 7 - Switch (ON/OFF) located at side of unit
Fig. 8 - Instrument Bridge
(L to R: Suction, Ultrasonic Scaler, 3-1 air Water Syringe,
Low Speed Air, High Speed Air, Electric Micromotor)
15 � EN

Publicidad

loading

Productos relacionados para iM3 EVOLUTION Serie

Este manual también es adecuado para:

Evolution evolveEvolution advancedEvolution professional