iM3 EVOLUTION Serie Instrucciones Para El Uso página 18

USER'S MANUAL
FACTORY SETTINGS -
RESTORATION & PROSTHETICS
Program 1 – Display shows P1:
forward drive, 40,000 rpm
Program 2 – Display shows P2:
forward drive, 20,000 rpm
Program 3 – Display shows P3:
forward drive, 2,000 rpm
Note: the transmission / reduction ratio
of the transmission instrument, speed of
the instrument (e.g. rotary instrument)
depends on the handpiece used.
The Display shows the speed
of the motor
FACTORY SETTINGS -
ENDODONTICS
(identical for 2:1 and 16:1 reduction ratio)
Program 1, display shows P1:
1:1, 300 rpm, 3.0 Ncm
Program 2, display shows P2:
1:1, 300 rpm, 2.5 Ncm
Program 3, display shows P3:
1:1, 300 rpm, 1.5 Ncm
Program 4, display shows P4:
1:1, 300 rpm, 1.0 Ncm
Program 5, display shows P5:
1:1, 300 rpm, 0.5 Ncm
The display shows the speed
of the root canal instrument
EVOLUTION VETERINARY DENTAL UNITS
FACTORY SETTINGS - KEYS
FACTORY SETTINGS -
PROPHYLAIS
Program 1, display shows P1: 30
Program 2, display shows P2: 20
Program 3, display shows P3: 15
PLUS key:
Increase speed / power, possible during use
MINUS key:
Reduce speed / power, possible during use
*By holding PLUS / MINUS key the values are
continuously increased / decreased*
PLUS Ncm key:
Ncm Increase torque
ENDO key:
Switch between Restoration & Prosthetics
operation, and Endodontics operation
FORWARD / REVERSE operation key:
Changing from forward to reverse operation is
not possible during use.
[inactive in Endodontics / Prophylaxis operation]
18 � EN
MINUS Ncm key:
Reduce torque
Ncm