iM3 EVOLUTION Serie Instrucciones Para El Uso página 19

USER'S MANUAL
OPERATION - CHANGING AND SAVING SETTINGS
The speed / power can be set at P for
minimum 2,000 rpm to maximum
40,000 rpm / 1 to maximum 40
Step 1: Press the program key [P]
Step 3: Increase Speed
Step 4: Reduce Speed
Step 5: Press the program key [P] for
approximately 2 seconds to save.
The set values flash and an acoustic signal is
emitted to confirm that all the settings have
been saved.
EVOLUTION VETERINARY DENTAL UNITS
Step 2: Increase Torque
[inactive in Restoration & Prosthetics operation]
Ncm
Step 3: Reduce Torque
[inactive in Restoration & Prosthetics operation]
Ncm
OPERATION - FORWARD / REVERSE SETTINGS
Factory Setting – Forward Operation.
Step 1: Press the forward / reverse operation key
»!«
signal is emitted.
»!«
is emitted three times in succession before the motor
is started in reverse operation, via the foot control.
Step 2: Press the program key [P] for approximately
If the program settings are not saved in reverse operation,
the device will switch back to Forward Operation
automatically, when you change programs.
and appear on the display and an acoustic
and will flash continuously. An acoustic signal
2 seconds to save.
19 � EN