General Functions - Corghi EXACT 70 Manual De Uso

Eichstädt Elektronik - Professionelle Kfz-Diagnosegeräte
Chassis situation Recalls the vehicle chas-
sis situation step.
EZShim Recalls the EZShim calculation
program.
Toe curve Recalls the toe curve checking
and adjustment procedure.
Distronic Adjustment Recalls the align-
ment screen for the equipment for adjusting the
Mercedes "Distronic" anti-collision radar system.
Bar kit In truck and trailer alignment mode,
it enables alignment with the accessories for refer-
ence to the axis of symmetry of the chassis.
Log Recalls the logs screen. Active for
calibration procedures and other utility programs.
Sensor cross-check Sensor cross-check
procedure for checking calibration.
Chassis misalignment In the truck and
trailer procedure, it recalls the screen that supplies
the estimate of the vehicle's degree of crooked-
ness.
Visual check Recalls the procedure for
visual checking of the vehicle.
Vehicle weight Recalls the procedure for
acquiring and adjusting the vehicle's axle weight.

General functions

Continue Moves on to the next program
step in the pre-set sequence.
Last step Returns to the previous pro-
gram step.
Operator's Manual EXACT 70
step without requiring execution of the current
step.
from the icon bar to the working zone.
selected object (for example, it increases the rim
diameter to the value above).
selected object (for example, it decreases the rim
diameter to the value below).
of the on-line help function. The icon is only active
when there is more than one page.
values.
axle being measured.
value entered.
the value entered.
it returns to adjustment of the previous axle.
it moves on to adjustment of the next axle.
entering the defaults required by the manufacturer
for alignment of VAS cars.
http://www.eichstaedt-elektonik.de
Skip operation Skips to the next program
Back to selection Moves the active cursor
Increase Increases the value of the
Decrease Decreases the value of the
Exit Ends the current operation.
Next page Displays the sequence of pages
Save Saves the vehicle's pre-adjustment
Save axle weight Saves the weight of the
Yes Confirms the selection made or the
No / Abort Aborts the selection made or
User code For changing the user code.
Last axle In the trailer and truck procedure,
Skip axle In the trailer and truck procedure,
VAS Set-up Changes the set-up settings,
EN
61