Getting Started; Introduction; Purpose Of The Manual; For Your Safety - Corghi Artiglio Uniformity Manual De Uso

1. GETTING STARTED

1.1 INTROdUCTION

1.1.a. PURPOSE OF THE MANUAL
The purpose of this manual is to provide the instructions necessary for optimum operation, use
and maintenance of your machine. If you sell this machine, please deliver this manual to the new
owner. In addition, so we can contact our customers with any necessary safety information, please
ask the new owner to complete and return to Corghi the change of ownership form attached to the
previous page of this manual. Alternatively, the new owner can send an email to service@corghi.com.
This manual assumes that the technicians are in possession of all the knowledge necessary for the
identification and maintenance of rims and tyres. Technicians must also have a thorough knowledge
of the functions and safety characteristics of all the specific tools used (such as the rack, lift or jack),
and a sufficient understanding of all manual or electric tools necessary to be able to work in safety.
The first section provides the basic information necessary to operate the ARTIGLIO UNIFORMITy
family of tyre changers safely. The following sections of this manual contain detailed information
regarding the equipment, operating procedures and maintenance. Italics is used to refer to specific
parts of this manual that offer additional information or clarifications. These references must be
read in order to obtain additional information about the instructions.
The owner of the tyre changer is the only person responsible for the observance of the safety
procedures and the organisation of technical training. The tyre changer is to be operated only by
a qualified and trained technician. Maintaining records of personnel trained is solely the respon-
sibility of the owner or management.
The ARTIGLIO UNIFORMITy family of tyre changers intended for mounting, demounting, and
inflating tyres of light passenger vehicles (cars only - not trucks or motorcycles) measuring up to
47 inches in diameter and 16 inches in width.
Copies of this manual and of the documents accompanying the machine may be obtained from
Corghi by specifying the type of machine and its serial number.
NOTICE: Design details are subject to change. Some illustrations may vary slightly in appearance
from the machine you have.

1.2 FOR YOUR SAFETY

HAZARd dEFINITIONS
EN
These symbols identify situations that could be harmful to the safety of personnel and/or cause
damage to the equipment.
DANGER
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Artiglio Uniformity User Manual
103