Wheel Measurement - Corghi Artiglio Uniformity Manual De Uso

been carried out to a network directory in .pdf format.
Press the keypad button to customize certain fields in the report printout.
Press 'next' to measure the next wheel.
Note: the moving vertical bar shown in the graphs represents the vertical axis in the 3
o'clock position.
Note: the laser sensors may not measure rim defects correctly on particularly reflective
surfaces. In this case repeat the measurement cycle with a new spin. If the problem per-
sists abort the measurement.

7.2 WHEEL MEASUREMENT

- select the wheel to be measured and press 'next' .
Note: before removing the wheel from the vehicle, mark each wheel with the number
representing the position of the wheel itself on the vehicle.
- enter the tyre load index and press 'next' ,
- mount the wheel on the turntable, rotate the wheel to bring the valve into the 3 o'clock
position and press 'next' .
- inflate the tyre to 2.4 bar and press 'next' ,
- press the turntable rotation pedal and wait for the rim measurement cycle to complete
Artiglio Uniformity User Manual
158