Corghi Artiglio Uniformity Manual De Uso página 141

Top Bead demounting
A- Check that the tool has
engaged with the tyre bead.
B- Operate the control
(Fig. 43) to prepare for the
subsequent demounting
procedure.
This must be done with the wheel at a standstill and not rotating.
C- Only operate the pedal now
(Fig. 44), until the bead
is completely demounted
D- Using the bead breaker
disc simultaneously on the
bottom side of the tyre may
also significantly facilitate this
operation (fig.42).
When demounting, excessive lubrication and/
or an unusual rim edge profile may cause the
tyre to slip on the wheel, making demounting
difficult. If this occurs, first try manoeuvring the
bead breaker disc upwards to lift the tyre. If
this does not work, to facilitate the procedure,
simply apply the PTS accessory between the tyre
and the edge of the wheel rim. This will allow
the bead to be lifted quickly off the rim so that
it can be demounted.
Artiglio Uniformity User Manual
B
CAUTION!
C
CAUTION!
C
B
43
44
EN
141