Basic Procedure; Preliminary Checks; Switching The Machine On - Corghi Artiglio Uniformity Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. BASIC PROCEDURES
CRUSHING HAZARd:
Some parts of the machine, such as the head,
the bead breakers and turntable moves during
operations.
do not approach moving parts of the machine.
AVOId PERSONAL INJURY
Before working on the ma-
chine:
- disconnect the power supply
plug (19a);
- disconnect the compressed
air circuit, disconnecting the
delivery line from the connec-
tor (fig. 19b).
Avoid unintended machine movement or failure. Use only original CORGHI tools
and equipment.

5.1. PRELIMINARY CHECkS

Check that there is a pressure of at least 8 bar on the Filter Regulator pressure gauge.
If the pressure is lower, the operation of some automatic procedures is not guaranteed.
After the correct pressure has been restored, the machine will function properly.
Check that the machine has been adequately connected to the power mains.

5.2. SWITCHING THE MACHINE ON

To switch the machine on, turn the main power switch and press the on button on the elec-
trical box. The main screen is first displayed when the machine is switched on the machine.
After 30 seconds, the measurement cycle screen is displayed automatically.
130
CAUTION!
CAUTION!
19a
CAUTION!
Artiglio Uniformity User Manual
19b

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido