Corghi Artiglio Uniformity Manual De Uso página 148

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Mounting the top bead
A - Use the bead pressing clamp (1, Fig. 56) and, if necessary, the bead depressor
(2 Fig. 56) on the rim shoulder, ensuring that the upper bead is in the well.
Avoid Personal Injury. Ensure that the top bead is held correctly by the tool before
mounting.
B - With the pedal
near the depressor tool.
For large (over 19") or particularly difficult wheels, a second clamp may be useful.
C - Apply additional pressure to the tyre with the control (
tool holder head into the rest position with the relative control.
D - Press the pedal
near the bead breaker disc, then remove the clamp.
E - Once the bead is mounted, lift the bead breaker disc with the control
148
CAUTION!
(Fig. 56), rotate the wheel to seat the bead until the clamp is
2
CAUTION!
to rotate the wheel again and bring the clamp (2, Fig. 56)
1
A
Fig. 57), and move the
Artiglio Uniformity User Manual
B
56
Fig. 57) .

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido