Corghi Artiglio Uniformity Manual De Uso página 146

6.6. MOUNTING
EXPLOSION HAZARd. Always check that the tyre/rim combination is correct in terms
of compatibility (tubeless tyre on tubeless rim, tube type tyre on tube type rim) and
geometrical size (keying diameter, cross-section width, Off-Set and shoulder profile)
before mounting.
AVOId PERSONAL INJURY.
Also check that rims are not deformed, that their fixing holes have not become
oval, that they are not encrusted or rusty and that they do not have sharp burrs on
the valve holes. Check that the tyre is in good condition with no signs of damage.
Preparing the tyre
(Fig. 51)
A - Grease both the
tyre beads.
B - Place the tyre on
the rim.
Positioning the head (fig.52)
A- Use the control
move the head into its working position .
The tool is already in the correct position
for mounting the tyre, unless the type of
rim has been changed.
146
DANGER
A
(Fig. 52) to
B
Artiglio Uniformity User Manual
51
52