Corghi Artiglio Uniformity Manual De Uso página 137

by tapping the control
C
C- Perform at least one full turn to break the bead.
The rim bead should be greased during the spin.
If the bead remains stuck to the wheel during demounting, carefully lubricate the
bead breaker disc and the bead seat. Also try inverting the direction of rotation of
the wheel (anticlockwise) while keeping the disc pressed against the tyre, and pro-
ceed as per a normal bead breaking operation performed in a clockwise direction.
D - Raise the bead breaker unit to its initial position. This action also rearms bead breaker
disc penetration (Fig. 31).
Applying lower bead
breaker (fig. 32)
A- Raise the lower bead
breaking unit from its rest po-
sition to its working position
with the lever (Fig. 32).
Artiglio Uniformity User Manual
(Fig. 31).
d
A
B
CAUTION!
A
d
B
A
31
A 32
EN
137