Technical Data - Corghi Artiglio Uniformity Manual De Uso

Before operating any command, follow the
instructions affixed to the machine.
Also see Section 3.3,
"INITIAL INSTALLATION"
1.2.d TECHNICAL dATA
- Compatible with following types of tyre ............ CONvENTIONAL - LOW PROFILE - RUN FLAT -
BALLOON - BSR
- Wheel dimension range:
• rim diameter (demounting mode) ............................................................................. from 12" to 32"
• rim diameter (diagnostic mode) ................................................................................ from 14" to 32"
• maximum tyre diameter ............................................................................................... 1200 mm (47")
• maximum tyre width ..................................................................... 15" (from wheel support surface)
- Turntable:
• tools positioning in relation to rim ......................................................................................... manual
• resting side ................................................................................................................................flanged
• centring ..................................................................................................................................... on cone
• clamping ................................................................................................................mechanical-manual
• drive system .......................................................................................... 2-speed motor-inverter unit
- Bead Breaker Unit:
• bead breaker cylinder force ..................................................................... ................................. 7600N
- Power supply:
• compressed air operating pressure: ...................................................................................8÷10 bar
• Min. air operating flow: ...................................................................................................... 100 Nl/min
- Electric motor rating
Motor Rating
200-230v/1ph 50/60hz
115v/1ph 60hz
- Wheel lift:
• lifting capacity .............................................................................................................................. 85 Kg
- Weight ........................................................................................................... 541 kg (with electrical box)
- Noise level
• Weighted noise level A (LpA) in working position .........................................................< 70 dB (A)
The noise levels indicated correspond to emission levels and do not necessarily represent
safe operating levels. Although there is a relationship between emission levels and exposure
levels, this cannot be used reliably to establish whether or not further precautions are neces-
Artiglio Uniformity User Manual
CAUTION!
Rotation
kW
speed rpm
0.75 7-20
0.75 7-20
Torque Weight of electric/
Nm electronic part kg
1200
1200
EN
10.2
10.2
115