Complete Measurement - Corghi Artiglio Uniformity Manual De Uso

At the end of the measurement cycle, the machine displays the following values:
- Radial Force variation of the wheel
- Lateral Force variation of the wheel
- radial run-out of the wheel
- tread depth
- loaded radius of tyre.
If, from the values measured, the machine determines that the relative tyre-wheel fit-
ment positions may be improved to reduce radial force variation, the icon
is displayed on the screen together with the maximum percentage improvement attain-
able by following the recommended procedure.
Press 'next' to measure the next wheel.
Note: the operator may also decide to perform the matching procedure even if not
expressly recommended by the machine.
7.4

COMPLETE MEASUREMENT

- select the wheel to be measured and press 'next' .
Note: before removing the wheel from the vehicle, mark each wheel with the number
representing the position of the wheel itself on the vehicle.
- mount the wheel on the turntable, rotate the wheel to bring the valve into the 3 o'clock
position and press 'next' .
- press the turntable rotation pedal and wait for the rim measurement cycle to complete
EN
Artiglio Uniformity User Manual
161