Unclamping And Unloading The Wheel - Corghi Artiglio Uniformity Manual De Uso

1
59
7. From the position of the centring ridges check
that the beads are properly positioned on the rim;
"HUMP" (H)
otherwise, deflate the tyre, break the beads as de-
scribed in the relevant section, lubricate and turn
the tyre on the rim. Repeat the mounting operation
described previously and check again.
8. Replace the internal mechanism of the valve.
9. Adjust the pressure to the rated inflation value by
pressing the deflation button (1, Fig. 59).
10. Fit the cap to the valve.
"double HUMP" (H2)
60

6.11. UNCLAMPING ANd UNLOAdING THE WHEEL

Releasing the wheel from the turntable
A - Undo the device by turning the handles anti-
clockwise (Fig. 61a).
B - Press the retainers and move the fastener flange
away from the rim by hand (Fig. 61b).
61a
Artiglio Uniformity User Manual
154