Logitech X56 HOTAS Manual Del Usuario página 13

Making your first Profile
1. Either hover the mouse pointer over the Cell, or press the button you want to create a Profile
for on the controller. If you hover your mouse over the Button 'A' Cell, Button 'A' will light up
on the 3D Joystick image. Or just click Button 'A' on the stick and the correct Cell will light up.
2. When the correct Cell is lit, left-click in it
and a large flashing cursor will appear in
the left side of the Cell. You will also see
a green tick, a red cross, and a mouse icon
on the right side of the Cell.
3. The Cell is now waiting for the keyboard
command. Using your keyboard, press the
button on the keyboard you would like
Button 'A' on the stick to activate. For this
example we will use the 'G' key, which usually
activates landing gear. When you press 'G' on
the keyboard, a large white tile with the letter
'G' should appear in the Cell, as shown here.
If this is the correct keyboard command, press
the green tick icon on the right side. If not,
press the red cross and redo the procedure
to get the keyboard command into the Cell
again.
4. After pressing the green tick icon,
the command name box will appear,
labeled as "Untitled" (left image, below).
Simply choose a name for the command
and type the name into this box. For this
example, we chose "Landing gear." Press the
enter key to complete the Cell. Button 'A'
= Landing gear, which is your keyboard's 'G'
key (right image, below).
13 English