Geologic ED 110 Manual De Instrucciones página 4

EN
Unpacking the Game
Unpack your new dartboard carefully, making sure all parts are
included. The following components are included in this set:
 1 Electronic Dartboard  Soft tip replacement pack
 6 Darts (unassembled)  Owner's Manual
Setup / Mounting Instructions
Choose a location to hang the dartboard where there is about
10 feet of open space in front of the board. The "toe-line" should
be 7' 9 1/4" from the face of the dartboard. Since this
dartboard is powered by 3 "AA" batteries (not included), you are
not limited in having to mount it close to an electrical outlet, so it
can be mounted anywhere you have the space.
Locate a wall stud and place a mark 62.75"
from the floor. Place another mark
11" directly above the first mark (73.75" from
floor). Center of Bullseye should be
5' 8" from the floor.
Insert 2 mounting screws in the center of the
stud using the marks you made as guides.
Be sure the top screw is directly above
bottom screw to ensure dartboard will be
level.
Insert 3 "AA" batteries in the battery
compartment on back of dartboard
Mount the dartboard on the wall by lining up
the holes on the back with the screws. It
may be necessary to adjust the screws until
the board fits snugly against the wall.
Dartboard Functions
POWER button - Press to turn game on or off. Dartboard has
an automatic suspend mode to conserve power and battery life
(if using batteries). The dartboard will make sound effect and
display "SLEEP" on the display after approximately 3 minutes of
non-use. However, the scores are stored in memory and can
be restored by pressing any button.
PLAYER/PAGE/SCORE button - This button is used at the
start of each game to select the number of players you want to
play the game. In addition, this button allows players to see
other player scores of not on active display. This dartboard
keeps track of up to 4 player scoring or 4 two-person teams.
When playing with more than 2 players, some scores will be not
be visible when not active. This button allows you to page
through all players' scores as needed.
START button - This multi-function button is used to:
 START the game when all options have been selected.
 CHANGE to the next player when one player is
finished with his round.
This will put dartboard in HOLD status between
rounds to allow player to
remove darts from the target area.
GAME buttons - Press to page through the on-screen game
menu.
CYBERMATCH button – Press to activate Cybermatch feature
where you can play against the computer. Press continually to
cycle through the 5 different skill levels.
Cybermatch Skill Levels:
Level 1 (C1)
Level 2 (C2)
Level 3 (C3)
Level 4 (C4)
Level 5 (C5)
Electronic Dartboard Operation
1. Press the POWER button to activate dartboard. A short
musical introduction is played as the display goes
through power-up test.
2. Press GAME buttons until desired game is displayed.
3. Press PLAYER button to select the number of players (1,
2, 3, 4, t 1-1, t 2-2,
t 3-3, t 4-4) The default setting is 2 players.
4. Press START button to activate game and begin play.
193cm
76 in
5. Throw darts
 The dart indicator display is located to the right of the
score display. The
number of darts displayed indicate the remaining
153cm
throws for the active
60 in
player.
 When all 3 darts have been thrown, a voice command
will indicate "next
now be removed without
are removed from the
next player. Voice
Team Play
In addition to scoring for up to 4 players, this dartboard is
capable of keeping score for team play up to a maximum of 4
two-person teams (8 individuals). To enter team play mode,
press PLAYER button continually until a "t" appears on the
display. Each team option is illustrated below:
t 2-2
t 3-3 3 teams,6 individual players
team-players 3&6
t 4-4
During team play, team members combine their scores to
arrive at a team score.
Caring for your Electronic Dartboard
1. Never use metal tipped darts on this dartboard.
Metal tipped darts will seriously damage the circuitry and
electronic operation of this dartboard.
2.
Do not use excessive force when throwing darts.
Throwing darts too hard will cause frequent tip breakage
and cause excess wear on the board.
Professional
Expert
Advanced
Intermediate
Beginner
player" and the score will flash. The darts can
affecting the electronic scoring. When all darts
playing surface press the START button to go to
command will indicate which player is up.
2 teams, 4 individual players
st nd
(1 team-players 1&3, 2 team-players 2&4)
st nd
(1 team-players 1&4, 2 team-players 2&5, 3
4 teams,8 individual players
st nd
(1 team-players 1&5, 2 team-players 2&6, 3
th
team-players 3&7, 4 team-players 4&8)
rd
rd
4