Stromlaufplan Standheizung (E39) M52 - BMW 5 Serie Manual De Instrucciones

Park Heating "Inline"
BMW 5 Series (E 39) left-hand drive saloon and touring
Models with 6-cylinder engine M52 (petrol)
Technical knowledge is required
Installation time approx. 5 - 6 hours, which can
vary according to the condition and fittings of the
vehicle.
If the optional time switch is fitted, the installation
time is extended by 0.5 hours.
Obligatory installation instructions for BMW vehicles with type code numbers:
E39
520i M52
523i M52
528i M52
E39/2 touring
520i M52
523i M52
528i M52
With engines:
M52 B20 110 KW
B25 125 KW
B28 142 KW
With the EC type approvals:
EC: e1 * 93/81 * 0028 * .. 5 / D
!
The type approval regulations should be observed!
In the Federal Republic of Germany the retrofitting of the auxiliary heating Thermo Top C in accordance with these
fitting instructions is not subject to an acceptance test as there is a special endorsement for this to the ABG
(General Certification for the part). The release from the obligation, which is to have an installation acceptance test
carried out in accordance
with § 19 of the Road Traffic Licensing Regulations, applies only when the installation of this heater conforms in
every way to the assembly requirements laid down in the following obligatory installation instructions. Any
departures from these installation instructions must entail an installation acceptance test in accordance with § 19
of the Road Traffic Licensing Regulations. In addition to these installation instructions, the instructions in the
operating manual and installation handbook also apply. The ABG accompanying these installation instructions and
the operating manual/installation handbook should go with the vehicle.
Auxiliary heating Thermo Top Z/C
Approval mark ~~~ S 292
Official engine
identification
20 6S 3
25 6S 3
28 6S 1
20 6S 3
25 6S 3
28 6S 1
Manual gearbox
LHD
DD11
DD31
DD51
LHD
DH11
DH31
DH51
Automatic
transmission
LHD
DD21
DD41
DD61
LHD
DH21
DH41
DH61
21