Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

en 46 | MERCURE 200 | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequenc-
es of the hazard as well as preventive action. Warning no-
tices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
Consequences of hazard in the event of fail-
symbol
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
|
1 695 109 017 2019-01-07
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2

On the product

! Observe all warning notices on products and ensure
they remain legible.
1.2.1

Product information

Identification plate
Machine model, 10 digit identification code; Voltage
(V), Frequency(Hz), Installed power (kW); Amperage
(A), Max. working pressure (kPa), Class of protection
(IP); Year of manufacture; CE Marking; 14 Digit code
and machine model; Bar code.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
EAC mark
¶
Confirms the suitability of the machine for
Russia.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter "Checking the direction of rota-
tion")
Back of the machine
¶
Indication of the operating voltage.
¶
Heed the information on the rating plate.
¶
The plate shown above is an example only; the volt-
age listed here depends on the electrical version of
the machine.
Balancing Start-Stop
¶
Located on the wheel protection indicates the direc-
tion to activate/stop the flange rotation.
Werther International S.p.A.