User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

en
48 | MERCURE 200 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Werther
Tire Service Equipment". These instructions must be
carefully studied prior to start-up, connection and opera-
tion of the MERCURE 200 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Werther Tire Service Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the MERCURE 200 and
must always be heeded.
2.3

Electromagnetic compatibility (EMC)

The MERCURE 200 satisfies the requirements of the
EMC directive 2004/108/EG.
The MERCURE 200 is a class B product as per
EN 61 326.
|
1 695 109 017
2019-01-07
3.

Product description

3.1

Intended use

The MERCURE 200 is a wheel balancing machine featur-
ing mechanical wheel clamping for the balancing of car,
light van and motorcycle wheels with a rim diameter of
10" - 27" and a rim width of 1" -
The MERCURE 200 is to be used exclusively for this pur-
pose and solely for the range of applications specified
in these instructions. Any other purpose is not consist-
ent with the intended use and is therefore not permis-
sible.
! The manufacturer cannot accept any liability for pos-
sible damage arising from improper use.
! * These measurements refer to standard rims (A); for
particularly shaped rims (B - C) it is recommended
using specific accessories.
A
B
C
3.2

Prerequisites

The MERCURE 200 must be installed on a flat surface
made of concrete or similar material and anchored in
position.
! An uneven or vibrating surface can lead to inaccurate
unbalance measurements.
! Any uneven floors or that do not meet the previously
expressed safety requisites relieve the manufacturer
from any liability for damages to persons and/or
property.
20".
Werther International S.p.A.

Publicidad

Tabla de contenido
loading

Tabla de contenido