Attachment Of Adhesive Weights With Ver - WERTHER INTERNATIONAL MERCURE 200 Manual De Instrucciones

9.9.3 Attachment of adhesive weights with vernier
caliper - Outer weight pliers
1. Insert the necessary adhesive weight in the external
clamp for weights (5).
Fig. 66:
2. Rest the weights positioning gauge stop (8) on the
rim edge using the external clamp (5) in contact with
the rim itself.
! The position of the adhesive weight is determined by
previously detected measurement "J" of the balanc-
ing plane and fixed on the weights positioning gauge
(see 9.5.2).
3. Using ejector (4) apply the adhesive weight and push
it to adhere well.
Fig. 67:
Werther International S.p.A.
B
4
Balancing a wheel | MERCURE 200 | 71
1 695 109 017
en
|
2019-01-07